CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Problem in fluid zone!!!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 1, 2004, 09:21
Default Problem in fluid zone!!!
  #1
STK
Guest
 
Posts: n/a
hello to everybody! I would like to ask you a simple question. How i can define fixed values in a small domain within a particular fluid zone (in the rest zone i want the solver to solve the Navier-Stokes properly) , without creating a new fluid zone. I tried with udf's but wasn't suceed. Why is it necessary to define new fluid zone??? thanks
  Reply With Quote

Old   September 1, 2004, 12:44
Default Re: Problem in fluid zone!!!
  #2
Zhihua
Guest
 
Posts: n/a
Go to -Adapt-Region, marked the region you want to define as fixed. Then go to Grid-separate-cells, here you can separate the two regions. Then when defining boundary conditions you can define the new fluid region as fixed values. Hope this can help.
  Reply With Quote

Old   September 1, 2004, 16:27
Default Re: Problem in fluid zone!!!
  #3
stk
Guest
 
Posts: n/a
thanks Zhihua! but i do not want to create a new fluid region, but in the same fluid zone i want to fix the values in a subdomain.In the rest of the zone i don't want to have fixed values.suppose that you have a zone x 0 to 200 and y 0 to 100, i want to have fixed values to the subdomain x 0 30 and y 20 50, without a new zone. i tried to separate cells by region but it is not activated, i can only by marking (at the seperate cells panel). thanks for your try! best regards
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Multiple fluide zone in ICEM Hexa Block problem ddqp ANSYS Meshing & Geometry 4 October 9, 2013 11:57
[blockMesh] StitchMesh on two patches anita OpenFOAM Meshing & Mesh Conversion 31 April 4, 2013 12:51
VOF - fluid property problem weechristo FLUENT 1 April 11, 2009 16:08
radiation transfer between solid and fluid zone shyang FLUENT 0 August 13, 2008 13:45
Error to re-open fluent case file J.Gimbun FLUENT 0 April 27, 2006 09:42


All times are GMT -4. The time now is 12:21.