|
[Sponsors] |
September 8, 2004, 08:47 |
MATERIAL_MIXTURE
|
#1 |
Guest
Posts: n/a
|
I'm working with fluent 6.0 and, by reading UDF manual, I've found these macros only in the example of 4.5.10:
THREAD_MATERIAL(t,0); MATERIAL_TYPE(m); MATERIAL_PROP(sp,PROP_mwi). Which is the meaning of the index 0 in the first??? In which case is it advisable to use them?(without DPM MACROS!!!) Thanks in advance! Ari |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|