CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

question about fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 19, 2004, 21:08
Default question about fluent
  #1
xuzhang
Guest
 
Posts: n/a
Is any one know how to use periodic moving wall boundary condition in Fluent? Thanks!
  Reply With Quote

Old   September 19, 2004, 22:52
Default Re: question about fluent
  #2
Aravind
Guest
 
Posts: n/a
Hi,

I am having the same problem. I think you will have to define a UDF for that. You can refer to the DEFINE macros section in the Fluent online help ( I think it is the sixth chapter- in the UDF manual section).I think it is called DEFINE_CG_MOTION! I hardly understand what's going on there, if you understand let me know.

Thanks
  Reply With Quote

Old   September 20, 2004, 11:34
Default Re: question about fluent
  #3
xuzhang
Guest
 
Posts: n/a
Thank you for your idea, but how I can find the help file?
  Reply With Quote

Old   September 20, 2004, 11:43
Default Re: question about fluent
  #4
stk
Guest
 
Posts: n/a
Fluent Documentation dynamic mesh programming. Look at the separate udf manual about define cg motion, or better at the tutorial about dynamic meshes, this with the valve. If you are not familiar about programming, you have to learn about c++ (a few things) and about udf capabilities. Hope this helps.
  Reply With Quote

Old   September 20, 2004, 12:26
Default Re: question about fluent
  #5
xuzhang
Guest
 
Posts: n/a
I do not have this Documentation about dynamic mesh programming. Anyone can give help on this? Thanks!
  Reply With Quote

Old   September 20, 2004, 22:42
Default Re: question about fluent
  #6
pzyss
Guest
 
Posts: n/a
http://gong.snu.ac.kr/down/on-line-d...help/index.htm

here is a website for Fluent's document~~
  Reply With Quote

Old   September 21, 2004, 00:11
Default Re: question about fluent
  #7
xuzhang
Guest
 
Posts: n/a
Thank you very much!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question about modeling an elastic wall in Fluent Mosheraa FLUENT 2 June 24, 2011 19:47
Fluent jobs through pbs ibnkureshi FLUENT 5 June 9, 2011 14:43
Question: BC openFOAM vs. FLUENT oehmu OpenFOAM 2 December 14, 2010 17:14
a question about the liquidus temperature in fluent hunter FLUENT 0 April 13, 2009 22:55
General question regarding Fluent 6.3s mesh motion AndyRoth FLUENT 0 December 8, 2006 13:01


All times are GMT -4. The time now is 14:38.