CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Capacity to model CFB riser

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 26, 2004, 18:17
Default Capacity to model CFB riser
Posts: n/a
Hi all,

I would be starting my work modelling high flux gas- solid Circulating Fluidized Bed riser. Can anybody explain me the capacity of 'Fluent' to model such gas-solid flow, where the solid fraction is more than 10%, in comparison of the same of the other commercial CFD codes such as 'CFX', 'StarCD' or any other.

Thank you very much for your time and i would greatly apreciate your detailed reply.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
multiphaseInterFoam for RAS turbulence model chiven OpenFOAM Bugs 7 August 23, 2011 02:52
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
2 stage axial turbine model convergence issues sherifkadry CFX 2 September 7, 2009 20:51
multi fluid mixture model issue rystokes CFX 3 August 9, 2009 19:13
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 04:27

All times are GMT -4. The time now is 10:43.