CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

How to set Water in fluent to compressible?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 28, 2004, 06:10
Default How to set Water in fluent to compressible?
  #1
Christian FH Biel
Guest
 
Posts: n/a
Hi there I need to set the material "water-liquid" to compressible for a evalution of the wavereflexionlaw in my Geometrie. If I simulate it with Air all works great. just need to get a wave into water. I tried it with a udf "pressure depended density" but I don't get a wave into the system.

thx
  Reply With Quote

Old   October 28, 2004, 10:08
Default Re: How to set Water in fluent to compressible?
  #2
rossc
Guest
 
Posts: n/a
A ben voilą on cherche de l'aide?
  Reply With Quote

Old   October 29, 2004, 02:33
Default Re: How to set Water in fluent to compressible?
  #3
Philipp Beierer
Guest
 
Posts: n/a
Fluent treats all liquids as incompressible. Hence, the only possibility is--as you already tried--to write your own udf. Special care must also be given to the numerics since you have a hyperbolic (equations) problem. Good Luck!

Philipp
  Reply With Quote

Old   October 29, 2004, 09:06
Default Re: How to set Water in fluent to compressible?
  #4
Christian FH Biel
Guest
 
Posts: n/a
Thx Philipp Beierer As I changed the solver to "coupled implicit" my problem was solved. the udf was causing the divergence. Now it works.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 14:43
How to define Saline water in Fluent Vin FLUENT 8 May 9, 2008 09:51
Env variable not set gruber2 OpenFOAM Installation 5 December 30, 2005 05:27
How to set environment variables kanishka OpenFOAM Installation 1 September 4, 2005 11:15
Terrible Mistake In Fluid Dynamics History Abhi Main CFD Forum 12 July 8, 2002 10:11


All times are GMT -4. The time now is 10:25.