CFD Online Logo CFD Online URL
Home > Forums > FLUENT


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   December 13, 2004, 08:38
Default Porosity_help_needed
Posts: n/a

I am facing the problem that already occured on Forum in Nov. I am trying to model the honeycomb straightener in a cavitation tunnel (let say from the point of view of losses only). I have read carefully Fluent UG and browsed Idelchik but I cannot get the answer how to estimate "Face permeability" especially expressed in [m2] as the Fluent needs (alfa).

I am not sure may I use the formula 6.19-6 (UG) which is dedicated to packed bed in my case the holes diameter (of 20mm vs 1mm of side thickness) is relatively large. Thanks for any help in advance!

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 14:35.