|
[Sponsors] |
December 4, 2004, 07:10 |
Lennard-Jones Parameters
|
#1 |
Guest
Posts: n/a
|
Hello,
I'd like to do a mixture/diffusive flow. 3x Gases, non-dilute, incompressible, turbolent, non-reactive - w/o thermal solution, to start from. I read the FLUENT manual 6.0 such that for this constellation Multicomponent Method, employing Lennard-Jones parameters is to be used - is this correct reading - suited for turbolent flow? Chap. 7.7.4 Mass Diffusion Coefficient Inputs 7.11 Kinetic Theory Parameters Clarification appreciated, best Greetings |
|
December 20, 2004, 13:41 |
Re: Lennard-Jones Parameters
|
#2 |
Guest
Posts: n/a
|
Could you find me the parameters for Platinum.
Thanks |
|
December 28, 2004, 08:46 |
Re: Lennard-Jones Parameters
|
#3 |
Guest
Posts: n/a
|
Helo Zhigang,
I were asking for clarification on the use of these parameters for incompressibe/turbolent gas mixture flow. No response that far. With regard to were to find reliable values, I'd be interested in sources too. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
twoPhaseEulerFoam - parameters | grjmell | OpenFOAM | 1 | June 16, 2011 08:13 |
units of geometrical parameters lost | SoobY | ANSYS Meshing & Geometry | 2 | January 10, 2011 03:58 |
Validity EWBM parameters | luuk.thielen | Main CFD Forum | 0 | July 13, 2010 03:09 |
Coal Particle Tracking Parameters | Michael | FLUENT | 1 | December 1, 2007 14:51 |
New to CFX-need explanations about mesh parameters | Cyril | CFX | 3 | November 24, 2006 06:33 |