display error

January 19, 2005, 00:20

Thanks if anyone can help me I run fluent6.122 on a PC with PCI-x video card which chip is Radeon X600 pro(ATI). When I try to display graphies, it turns the following error Error: Floating point error: divide by zero Error Object: () Graphics Device Information Driver WOGL v2.25 Window Size Color Planes 24 Double Buffer swap Z Buffer Planes 0 Gouraud Shading yes Hardware Lights 1 Cutting Planes 0 I test on the other PC (AGP card MMX440) than the display functions are doing well. Thanks for any suggestions!

Davis

February 2, 2005, 01:53

The error is due to an incompatible video card driver. For W2000 or XP, please try the following: 1) Download the latest version of the driver from internet(http://www.ati.com under "drivers & soft-ware") 2) If this does not help, activate the windows driver by starting fluent like this: fluent 2d (or 3d) -driver msw. If this solves the problem you can set this driver as default for Fluent via environment variable:* Control Panel, System, Advanced, Environment Variables * Under User or System Variable, click "New" * In the variable text box type: HOOPS_PICTURE * In the value text box type: msw/win * Click OK

January 19, 2005, 00:20	display error	#1
davis Guest Posts: n/a	Thanks if anyone can help me I run fluent6.122 on a PC with PCI-x video card which chip is Radeon X600 pro(ATI). When I try to display graphies, it turns the following error Error: Floating point error: divide by zero Error Object: () Graphics Device Information Driver WOGL v2.25 Window Size Color Planes 24 Double Buffer swap Z Buffer Planes 0 Gouraud Shading yes Hardware Lights 1 Cutting Planes 0 I test on the other PC (AGP card MMX440) than the display functions are doing well. Thanks for any suggestions! Davis

February 2, 2005, 01:53	Re: display error	#2
harald Guest Posts: n/a	The error is due to an incompatible video card driver. For W2000 or XP, please try the following: 1) Download the latest version of the driver from internet(http://www.ati.com under "drivers & soft-ware") 2) If this does not help, activate the windows driver by starting fluent like this: fluent 2d (or 3d) -driver msw. If this solves the problem you can set this driver as default for Fluent via environment variable:* Control Panel, System, Advanced, Environment Variables * Under User or System Variable, click "New" * In the variable text box type: HOOPS_PICTURE * In the value text box type: msw/win * Click OK

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nonNewtonian viscosity model	mhassani	OpenFOAM Programming & Development	5	January 7, 2013 09:27
Accessing phi from a fvPatchField at same patch	johndeas	OpenFOAM	1	September 13, 2010 20:23
[swak4Foam] groovyBC: problems compiling: "flex: not found" and "undefined reference to ..."	sega	OpenFOAM Community Contributions	12	February 17, 2010 09:30
attach/detach (valve opening/closing)	phsieh2005	OpenFOAM Running, Solving & CFD	2	March 21, 2009 05:18
user defined function	cfduser	CFX	0	April 29, 2006 10:58