CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Force calculation in Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 15, 2005, 17:15
Default Force calculation in Fluent
  #1
Jason
Guest
 
Posts: n/a
My model has two rotors inside a symmetric chamber. The rotors rotate in opposite direction which forms a symmetric flow field. The common sense is that the pressure forces on the rotors should be on the opposite direction and have the smae value. However, the fluent gives a very different force values and sometimes the forces are on the same direction. Anyone got this problem before?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF in Fluent Andrew Fluent UDF and Scheme Programming 5 March 7, 2016 04:38
Automatically start new calculation after the one before is completed? (FLUENT 12.1) mars21t FLUENT 4 March 27, 2011 10:52
exporting drag force from fluent fluentguy FLUENT 2 October 27, 2009 15:19
Force report every iteration in unsteady flow calculation Friso Landstra FLUENT 0 October 23, 2009 08:13
Warning 097- AB Siemens 6 November 15, 2004 05:41


All times are GMT -4. The time now is 08:22.