CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Need help with gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 16, 2005, 19:01
Default Need help with gambit
Posts: n/a

I am using gambit and I'm new to it. I am trying to model a curved body with openings for flow to exit through it. I have some problem in creating the openings once I have the body geometry modelled. I need to split an arc at specified points so as to get the openings (which I later specify as inlet/outlet in the BC). Though gambit has provisions to split a line, there doesn't seem to be any such for splitting an arc. It does a 'virtual split'. But, this will pose other problems while creating the 'face'. Can anybody help/suggest me how can I overcome this problem and successfully split the arc at 2 pre-specified locations. Any help is appreciated.

thanks, ravi.
  Reply With Quote

Old   March 16, 2005, 23:47
Default Re: Need help with gambit
Posts: n/a
use split the edge for arc it works for any edge like straight or curved...
  Reply With Quote

Old   March 19, 2005, 18:00
Default Re: Need help with gambit
Posts: n/a
Hi srinivas,

Thanks for the suggestion. It worked.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting Fluent mesh files to Gambit neutral files samuelkc ANSYS Meshing & Geometry 7 August 30, 2017 03:54
[GAMBIT] Canīt start GAMBIT zalho ANSYS Meshing & Geometry 17 August 28, 2013 09:45
Gambit help: Cube inside cube Jack Martinez FLUENT 13 August 11, 2010 06:29
Gambit 2.3.16, Xming or Exceed...HELP! bambam3417 FLUENT 10 May 7, 2010 12:39
Gambit -dev X11 doesn't work Ervin Amet FLUENT 0 October 28, 2007 09:33

All times are GMT -4. The time now is 04:06.