Meshing problem

April 3, 2005, 15:03

Hi, I'm trying to mesh a volume constitute basicaly of 2 rectangles joined together by a bank tube. I've diveded de volume into 3 parts ( the 2 rectangles and the bank tube) to create the mesh, but I'm having problems whit the holes on the faces of the rectangles (the entrance and outlet of the bank tube). Does anyone have a sujestion on how to mesh this volume? Thanks in advance.

John

April 4, 2005, 05:22

how did you created the volumes. how many faces do you have at the joining surfaces between the volumes. you must have just one surface. and normaly it works. ok

April 3, 2005, 15:03	Meshing problem	#1
John Guest Posts: n/a	Hi, I'm trying to mesh a volume constitute basicaly of 2 rectangles joined together by a bank tube. I've diveded de volume into 3 parts ( the 2 rectangles and the bank tube) to create the mesh, but I'm having problems whit the holes on the faces of the rectangles (the entrance and outlet of the bank tube). Does anyone have a sujestion on how to mesh this volume? Thanks in advance. John

April 4, 2005, 05:22	Re: Meshing problem	#2
daniel Guest Posts: n/a	how did you created the volumes. how many faces do you have at the joining surfaces between the volumes. you must have just one surface. and normaly it works. ok

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with querying the meshing database in CFX-Pre	ashtonJ	CFX	18	April 18, 2023 23:49
[Other] Hex meshing problem DM12	patrick	ANSYS Meshing & Geometry	7	January 9, 2015 07:21
Strange ANSYS Meshing 13.0 Problem	brunob	ANSYS Meshing & Geometry	3	June 21, 2011 20:03
Meshing problem in GAMBIT	Vidya Raja	FLUENT	0	May 20, 2006 23:31
GAMBIT meshing problem	Gauthier Lambert	Main CFD Forum	1	August 3, 2000 09:22