flow arround porous block
Hi I am modeling a heat transfer flow in channel with porous block (partielly blocked). I have problem to specify the interface prous/clear fluid. thanks.
|
Re: flow arround porous block
You should define the porous region as a seperate surface and name it differently in Gambit while you're making your model. Then activate the porous region condition in the Fluent when imported.
Amir |
Re: flow arround porous block
Hi Amir, How I can define the realtion betwwen the two faces (in 2D), subrtact the block face from the channel face or slight the faces?
|
Re: flow arround porous block
You should geometrically divide your porous region from the main region in order to be able to define the specific porous region boundary conditions on that.
|
Re: flow arround porous block
the tow face have connected edge or sepate edge (the edge that separate faces is common or each face has prpoer edge).
|
Re: flow arround porous block
Edge is common
|
All times are GMT -4. The time now is 04:03. |