CFD Online Logo CFD Online URL
Home > Forums > FLUENT

a problem of udf

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 26, 2005, 21:44
Default a problem of udf
Posts: n/a
i wirte a udf for slip wall,using user-defined->funcions->interpreted,it can work.but,after i set all the solver and boudery condition, i gien the error message as fllowing when i set parameter in initialize menu. the error message is :

error: FLUENT received fatal signal(ACCESS_VIOLATION) 1 Note exact events leading to error 2 Save case/date under new name 3 Exit program and restart to continue 4 Report error to your distributor Error Object)

please give me some advice
  Reply With Quote

Old   April 27, 2005, 08:05
Default Re: a problem of udf
Posts: n/a
This is quite a common error message. Search this forum to find a lot of discussions about this.

It is usually connected to the access to memory locations by Fluent, as far as I know.

Make sure you have defined the correct number of UDS and/or UDM.

If you compute gradients in your UDF, be aware that at the beginning of the computation they are not defined, so, if you use the gradient of scalar i, it is better if you put a control like this:


{ what you have to do... }


{ ...use an alternative expression for what you need to compute... }


  Reply With Quote

Old   April 27, 2005, 09:39
Default Re: a problem of udf
Posts: n/a
Dear Ale: thank you for you help,now it can work well,my problem is to compute slip flow in micronozzle by using fluent.but there are two problem to be sloved: first: I set slip condition in Shear stress of Specified Shear under wall plant of boudary condtion menu. is it ringht?? second:these two box need stress(unit is pascla),but I only know the slip velosity,how can i translate it to stress?? BTW: could you please tell me you msn or email?? my msn is thanks
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
ATTN ALL: SOLUTON TO UDF COMPILE PROBLEM Rizwan Fluent UDF and Scheme Programming 40 October 18, 2017 07:17
Problem with my udf july Fluent UDF and Scheme Programming 3 June 20, 2010 06:56
UDF problem mansha goraya FLUENT 0 October 29, 2007 01:31
udf compiling problem akr FLUENT 3 August 22, 2007 07:14
UDF problem chiseung FLUENT 4 January 10, 2002 10:58

All times are GMT -4. The time now is 06:20.