CFD Online Logo CFD Online URL
Home > Forums > FLUENT

have problem with porous modeling

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 28, 2005, 06:59
Default have problem with porous modeling
Mohsen Ghanaei
Posts: n/a
hi i want to model a Heat pipe that has porous wick in fluent.i used VOF model for two phase model but my vapor insted of liquid moves on porous wick . i want to know if i change some parameteres like Viscuse and Inertial resistance or Power low model parameters such C0 , C1 it workd good or not ? and anybody knows something regard these parameters.

wishes, M.Ghanaei
  Reply With Quote

Old   May 18, 2005, 02:42
Default Re: have problem with porous modeling
Posts: n/a
Hello please i want to calculate resistance for porous media (c2 in fluent) but in the Van Winkle formulation I can not calculate c(the coffecient tabulated by reynolds &...) please I want to have this table for c also Is it possible to use porous media for modeling the electrofilter guide plate
  Reply With Quote

Old   May 23, 2005, 13:52
Default Re: have problem with porous modeling
Posts: n/a
You will find your C coeffcient in the perry's handbook, look for "perforate plate"
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure drag problem in porous media with interFoam skp OpenFOAM Running, Solving & CFD 8 May 27, 2015 08:10
Problem with rhoPorousMRFSimpleFoam and how to define porous media Amit Mathur OpenFOAM 6 July 18, 2013 06:57
problem about porous media and surface reaction Jeff Lee FLUENT 3 November 24, 2011 14:46
Membrane porous jump problem in VOF Hema kothimbare FLUENT 0 August 7, 2009 01:22
porous domain problem sudhakar CFX 6 November 29, 2006 10:48

All times are GMT -4. The time now is 12:53.