CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

velocity magnitude contours

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 27, 2005, 15:35
Default velocity magnitude contours
  #1
gh
Guest
 
Posts: n/a
hello there,

when viewing the results of my simulation, i can't seem to be able to view the velocity magnitude contours (they appear completely blue i.e. 0 m/s). however, the velocity magnitude vectors appear to be fine? can anyone shed any light on why this is happening? very many thanks for your time. gh.
  Reply With Quote

Old   May 28, 2005, 10:27
Default Re: velocity magnitude contours
  #2
Alec Eiffel
Guest
 
Posts: n/a
are you displaying the velocity contours on a wall?
  Reply With Quote

Old   May 28, 2005, 15:15
Default Re: velocity magnitude contours
  #3
antonio
Guest
 
Posts: n/a
try to set a specific range of values..do you know how to use the acoustic module in fluent? thanks Antonio
  Reply With Quote

Old   May 31, 2005, 10:16
Default Re: velocity magnitude contours
  #4
Gary Holland
Guest
 
Posts: n/a
Hi Alec and Antonio, thanks for your reply messages. I am trying to display contours on the walls. If i try to display the velocity from the 'inlet' it only seems to diplay a tiny section of contours and then again, the rest is just blue. I am a beginner with FLUENT and so, no, i havn't yet used the acoustic module. Any help would be very much appreciated. thanks, gary.
  Reply With Quote

Old   June 1, 2005, 16:14
Default Re: velocity magnitude contours
  #5
Tang
Guest
 
Posts: n/a
Well I can say that you are assuming no slip wall conditions, so there won't be any velocity contours at the wall. You must change this in your wall boundary condition if you want to account for velocity at the wall boundary.
  Reply With Quote

Old   June 1, 2005, 17:35
Default Re: velocity magnitude contours
  #6
gh
Guest
 
Posts: n/a
Tang, thank you very much for the tip, it seems to work fine now. Just to make sure that i did what you suggested correctly - i checked the circle for specified shear, although is it ok to leave all 3 at zero? thanks again, gary.
  Reply With Quote

Old   June 1, 2005, 23:50
Default Re: velocity magnitude contours
  #7
zxaar
Guest
 
Posts: n/a
it some times does this way, specially when we stop it when it is updating the variables after a time step, i was once shocked to see zero pressure field in the domain, but after 1 iteration it recovered the pressure field.
  Reply With Quote

Old   June 7, 2005, 10:27
Default Re: velocity magnitude contours
  #8
Mahesh
Guest
 
Posts: n/a
I guess u r solving 2D case, hence facing this problem. Select everything in surafce panel & then plot the contour.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Plotting velocity and direction contours bhavin1986 Main CFD Forum 2 April 29, 2011 17:58
Emergency:UDF for a time dependent parabolic velocity zumaqiong Fluent UDF and Scheme Programming 12 March 25, 2010 13:00
Velocity in Porous medium : HELP! HELP! HELP! Kali Sanjay Phoenics 0 November 6, 2006 07:10
Gradient of the velocity magnitude anja OpenFOAM Pre-Processing 5 June 6, 2006 09:39
Plotting ribbons with mapped velocity magnitude Ulf Siemens 1 July 30, 2004 09:00


All times are GMT -4. The time now is 13:25.