 |
 |
 |
|
|
|
[Sponsors] | ||||
May 30, 2005, 23:14
|
HELP: How to get Heat transfer Coefficient?
|
#1 |
|
Guest
Posts: n/a
|
Hi all,
I don't know how to get the value of the HTCs in Fluent. Could somebosy help me? Thank you ahead! |
|
|
||
|
May 31, 2005, 02:30
|
Re: HELP: modeling electerofilter
|
#2 |
|
Guest
Posts: n/a
|
hi how can i model the electrofilter by fluent. if you have any answer i want to call me by yahoo messenger.i am online.
|
|
|
|
||
|
June 1, 2005, 11:06
|
Re: HELP: How to get Heat transfer Coefficient?
|
#3 |
|
Guest
Posts: n/a
|
Hi Benny!
You are able to specify different boundary conditions for the temperature. E.g. konstant wall heat flux... The HTC will bew calculated from these bc's... Or do you want to set it as bc? Sorry for my poor English... |
|
|
|
||
|
June 3, 2005, 03:07
|
Re: HELP: How to get Heat transfer Coefficient?
|
#4 |
|
Guest
Posts: n/a
|
Hi Korni,
Yes, it seems that it's quite easy to obtain the HTC in the fluent, but I found that the value I obtained is not right. So I hope somebody could hele me to obtain the right value. |
|
|
|
||
|
June 6, 2005, 11:42
|
Re: HELP: How to get Heat transfer Coefficient?
|
#5 |
|
Guest
Posts: n/a
|
You need to set the reference values for Temperature, etc to represent the bulk flow. Alternatively, you could use the new wall function based HTC calculation.
Regards Mark |
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Heat transfer coefficient - what is waht | Stan | FLUENT | 28 | December 29, 2021 16:29 |
| Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
| Constant velocity of the material | Sas | CFX | 15 | July 13, 2010 08:56 |
| Convective / Conductive Heat Transfer in Hypersonic flows | enigma | Main CFD Forum | 2 | November 1, 2009 22:53 |
| Convective Heat Transfer - Heat Exchanger | Mark | CFX | 6 | November 15, 2004 15:55 |
Linear Mode
