CFD Online Discussion Forums

CFD Online Discussion Forums (
-   FLUENT (
-   -   Source Term (

Murthy June 5, 2005 05:42

Source Term
Hi, I am simulating Multipahse Stirred Vessel using fluent6.x. I have not explicitly created sparger in the geometry to sparg gas so i want to specify gas input as a source term.I know how to do it in fluent 4.4 but not sure how to specify in fluent 6.x. I would appreciate if some one could help me out in this regard.

Regards Murthy

Alec Eiffel June 6, 2005 10:34

Re: Source Term
you need to define the cell for sparger as a different zone using gambit. Then in the boundary conditions for that zone you can define a mass and momentum source

have a look at section 7.28 in fluent help files

Murthy June 7, 2005 00:11

Re: Source Term
Hi Alec,

Thanks for ur reply. I would try it. Murthy

All times are GMT -4. The time now is 17:23.