CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Gambit: circular-rectang. transition

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 3, 2005, 14:49
Default Gambit: circular-rectang. transition
Posts: n/a
Does anybody knows how to built a volume in Gambit which is formed by a smooth transition from rectangular (not square) to circular contour (the laters' diameter is smaller than the sides of the former)? Thanks a lot.
  Reply With Quote

Old   July 9, 2005, 09:01
Default Re: Gambit: circular-rectang. transition
Posts: n/a
I'm afraid that's not quite possible in Gambit. This is a job for much more professional CAD programs, like CATIA for example. There you could use a "loft" operation and your problem will be solved in a matter of seconds.

Best whishes, Razvan
  Reply With Quote

Old   July 9, 2005, 11:50
Default Re: Gambit: circular-rectang. transition
Posts: n/a
Thanks, I've done it in Solidworks. BTW, from square (not rectangular) to the concentric circle it is possible in Gambit through the variable radius feature. Regards, Alex.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
benchmark: flow over a circular cylinder goodegg Main CFD Forum 12 January 22, 2013 12:47
problem with meshing in gambit in circular section mohammadkm ANSYS Meshing & Geometry 1 August 24, 2011 01:15
Gambit 2.3.16, Xming or Exceed...HELP! bambam3417 FLUENT 10 May 7, 2010 12:39
Code release: Flow Transition and Turbulence Chaoqun Liu Main CFD Forum 0 September 26, 2008 17:15
Gambit -dev X11 doesn't work Ervin Amet FLUENT 0 October 28, 2007 09:33

All times are GMT -4. The time now is 05:19.