CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Gridgen and reversed flow.

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 5, 2005, 22:36
Default Gridgen and reversed flow.
Posts: n/a
Hi Everybody!

I used Gridgen to generate the grid system for solver is Fluent. When I use the minimum spacing is 10e-04, the Solver running without warning about "reversed flow", But when I reduce the minimum spacing size to 10e-5, in the same solving condition, the reversed flow warning appears.

So, could you show to me what is prolem and what I should do? I'm sorry if it is stupid question, but hoping your recommendation.

Thanks in advanced! pah
  Reply With Quote

Old   July 8, 2005, 06:00
Default Re: Gridgen and reversed flow.
K. Jagus
Posts: n/a
I also use Gridgen. DO You have the reversed flow only at the beginning? I think it is pretty common to receive this warning at the beginning, usually it disappears after few iterations
  Reply With Quote

Old   July 8, 2005, 11:10
Default Re: Gridgen and reversed flow.
Posts: n/a
Yes, K. Jagus!

Sometime, I met the situation like you said,but sometime it do not disappear and the solution is stopped due to overflow or some others warning. So, I am confusing about this problem, somebody can help plz! Thanks a lot

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Negative Volume in Mesh by Gridgen James FLUENT 5 February 3, 2010 08:34

All times are GMT -4. The time now is 02:37.