CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Gridgen + Fluent 6.2

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 11, 2005, 13:08
Default Gridgen + Fluent 6.2
Posts: n/a

I am trying to make my mesh in Gridgen and use it in Fluent 6.2.16. The geometry is a plain circular pipe, the domain is 6D where D is the diameter of the pipe. I want to give periodic boundary conditions on the circular face, but am not able to specify that either in Gridgen or Fluent.

Can anyone give me some ideas on where I might be doing something wrong or if this is possible at all.


  Reply With Quote

Old   July 12, 2005, 01:40
Default Re: Gridgen + Fluent 6.2
Posts: n/a
Yes, you can do it in Fluent through text command. First you have to create periodic zone using grid->modify-zones->make-periodic and then you can define mass or pressure gradient periodic bc from bc panel.

Hope it helps!

  Reply With Quote

Old   July 20, 2005, 13:35
Default Re: Gridgen + Fluent 6.2
Posts: n/a
select the faces as wall, export to fluent n change the boundary condition there. sharuk
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Access violation error with Fluent 6.2 Prasad Dudhgaonkar FLUENT 4 November 27, 2013 14:06
few quesions on ANSYS ICEMCFD and FLUENT Prakash.Paudel ANSYS 0 August 12, 2010 12:07
Fluent 12.0 is worst then Fluent 6.2 herntan FLUENT 5 December 14, 2009 03:57
Fluent 6.2 and 6.3 compatibility Ale FLUENT 0 July 31, 2008 03:47
Fluent 6.2 and gcc compiler in Sun Blade 2500 Nitu Gupta FLUENT 8 April 29, 2005 13:58

All times are GMT -4. The time now is 22:27.