CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Lig-law inlet profile

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   July 14, 2005, 13:13
Default Lig-law inlet profile
Posts: n/a
Hello I am having some confusion regarding implementing the inlet BC through log-law profile. I know the reference velocity at point A (i.e Uref at A is 10m/s, Which is cup type anemometer mounted on roof of the building ) Height of the building, z=18m . But wind is flowing from the inlet plane of computational domain (250*114*80). Here I am getting confused, how to define the inlet velocity in the inlet plane, so that at point A wind velocity should be 10m/s. Regards, Vinod
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
patching velocity profile to the inlet face of domain vasuaero1988 Fluent UDF and Scheme Programming 1 September 29, 2010 03:49
translational periodic BC vs Fully Developed Profile at Inlet Prakash.Paudel FLUENT 1 August 20, 2010 11:01
[swak4Foam] Scale discrete inlet velocity profile with groovyBC cboss OpenFOAM Community Contributions 1 June 20, 2010 13:02
Inlet Profile with CFX-Pre Fadi Ishak CFX 1 June 10, 2008 07:12
how to give sectional velocity profile at inlet? fkonias CFX 3 January 29, 2008 10:28

All times are GMT -4. The time now is 07:55.