CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

the interface bc in Eulerian Model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 28, 2005, 03:37
Default the interface bc in Eulerian Model
  #1
lily
Guest
 
Posts: n/a
Hi.I use the interface boundary condition in the Eulerian multiphase Model. but the Fluent says that : Error: FLUENT received fatal signal (ACCESS_VIOLATION) 1. Note exact events leading to error. 2. Save case/data under new name. 3. Exit program and restart to continue. 4. Report error to your distributor. Error Object: () I want to know if the interface boundary condition can be used in the Eulerian multiphase Model. Thanks in advance.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
question about eulerian model for packed bed rone FLUENT 2 July 19, 2007 21:58
Mass and het transfer using eulerian model Pablo FLUENT 0 February 16, 2007 09:36
Eulerian porous model kevin FLUENT 0 December 3, 2006 11:45
Eulerian Model Hassan FLUENT 2 September 7, 2006 08:17
the Eulerian model and the lower volume fraction hx li FLUENT 2 October 27, 2005 07:17


All times are GMT -4. The time now is 13:24.