CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Moving boundary Issue

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 11, 2005, 19:21
Default Moving boundary Issue
  #1
Andy
Guest
 
Posts: n/a
Hi Friends,

I am modeling a injector needle movement using 2D axisymetric model with the moving boundary, th eprofile is a parabolic shape. When reviewing the movement, negative volume always appear near 75% of the stroke. But if I change the cell height of the moving boundary to a much larger one (10 times of the others) together with a collapse factor 1, the movement could finish. But in this way, it will generate continuity convergence problem when I analysis. Could somebody help me with this issue?
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Domain Imbalance HMR CFX 5 October 10, 2016 06:57
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
inlet velocity boundary condition murali CFX 5 August 3, 2012 09:56
Truck brake chamber transient simulation - Moving boundary vatsa STAR-CCM+ 0 February 11, 2010 01:14
solidification/melting model - moving boundary Thomas Bauer FLUENT 2 July 6, 2006 02:42


All times are GMT -4. The time now is 00:17.