CFD Online Logo CFD Online URL
Home > Forums > FLUENT

working with mixing plane

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   August 16, 2005, 10:44
Default working with mixing plane
Posts: n/a
Sponsored Links

I`m working with a model which have two sections: stationary and movil sections. I`m using mixing plane to simulate the interface between both sections but it only reports solution on movil section. What is wrong?

thanks for you suggest!!
  Reply With Quote
Sponsored Links

Old   August 19, 2005, 14:42
Default Re: working with mixing plane
Posts: n/a
go to define and then turbo topology and create turbo topology for stationary (its inlet and outlet) and then moving and then overall

hope it works
  Reply With Quote

Old   August 19, 2005, 16:11
Default Re: working with mixing plane
Posts: n/a
thanks for your suggest. I hope that it works to. We have in contact to will said you if it functioned.

See you later.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to setup mixing plane interface in STAR-CCM+ mrjonezz STAR-CCM+ 3 July 8, 2015 11:51
Problem with Mixing plane Mitpostdoc FLUENT 0 July 26, 2011 14:31
Meshing a Mixing Plane in ICEM Will Anderson ANSYS Meshing & Geometry 2 November 9, 2010 10:16
Meshing a Mixing Plane using ICEM Will Anderson FLUENT 0 November 6, 2010 18:08
Mixing plane geometry definition Hbet FLUENT 0 January 18, 2002 08:16

Sponsored Links

All times are GMT -4. The time now is 22:51.