Fluent:Operating conditions panel
 

Hi

can anyone make me clear about the panel "operating conditions". In this panel there are three boxes. 1.operating pressure:( if am correct,this is the pressure at which the simulation starts,)

2.X:_____________ and 3.Y:_____________

What are these X and Y values. Will these values influence the calculation of Static Pressure values of the simulation

any sort of response is highly appreciated

thank you

Re: Fluent:Operating conditions panel
 

The location coordinates at which this pressure value is

Re: Fluent:Operating conditions panel
 

I think ,The value of "x and y",you said is just used in the position such as liquid or gas density differ from air.

Re: Fluent:Operating conditions panel
 

These coordinates are used for the reference pressure location for incompressible flows that do not involve any pressure boundaries. Just refer to the Fluent manual "physical boundaries => reference pressure location" if you need any further details