CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Fluent:Operating conditions panel

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 5, 2005, 03:50
Default Fluent:Operating conditions panel
  #1
Madhukar Rapaka
Guest
 
Posts: n/a
Hi

can anyone make me clear about the panel "operating conditions". In this panel there are three boxes. 1.operating pressure if am correct,this is the pressure at which the simulation starts,)

2.X:_____________ and 3.Y:_____________

What are these X and Y values. Will these values influence the calculation of Static Pressure values of the simulation

any sort of response is highly appreciated

thank you
  Reply With Quote

Old   September 5, 2005, 04:33
Default Re: Fluent:Operating conditions panel
  #2
Ahmed
Guest
 
Posts: n/a
The location coordinates at which this pressure value is
  Reply With Quote

Old   September 5, 2005, 09:56
Default Re: Fluent:Operating conditions panel
  #3
jjw
Guest
 
Posts: n/a
I think ,The value of "x and y",you said is just used in the position such as liquid or gas density differ from air.
  Reply With Quote

Old   September 5, 2005, 11:10
Default Re: Fluent:Operating conditions panel
  #4
Mario
Guest
 
Posts: n/a
These coordinates are used for the reference pressure location for incompressible flows that do not involve any pressure boundaries. Just refer to the Fluent manual "physical boundaries => reference pressure location" if you need any further details
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
3D PANEL METHOD Paolo Lampitella Main CFD Forum 12 August 27, 2014 12:46
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Solar Panel Water heating using solidwork Flow Simulation axtray FloEFD, FloWorks & FloTHERM 2 September 21, 2011 16:47
A problem about setting boundary conditions lyang Main CFD Forum 0 September 19, 1999 19:29


All times are GMT -4. The time now is 04:13.