CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Strip Casting Modeling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 21, 2005, 02:39
Default Strip Casting Modeling
  #1
Can Atli
Guest
 
Posts: n/a
Hello,

I need to do a solidification modeling for the twin roll casting process. The solidifying metal upon contact with the rolls has a curved trajectory as opposed to a straight path in conventional continuous casting. I am not sure how i can define the transport term in this case. Another problem is, for the molten metal and the roll contact, is it ok to define only a rotating wall with a heat flux?

Thank you for your assistance
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
sand casting quintet Main CFD Forum 1 June 23, 2008 07:35
May Focus Area: Turbulence Modeling Jonas Larsson CFD-Wiki 0 May 2, 2006 12:48
Modeling Flow/Saturation/Absorption in Fibers Gene Dougherty Main CFD Forum 0 June 6, 2003 15:49
Solid Modeling Chris Main CFD Forum 10 July 2, 2002 08:12
CFD Modeling of Two-phase Flow in Small Dia.Tubes Eric Poindexter Main CFD Forum 2 September 22, 2000 10:21


All times are GMT -4. The time now is 17:16.