Ultra slow convergence velocity in the simulation
Model studied:
A rectangle (100 microns * 1 micron) with a uniform heat source (2.02W/m2) inside, all the edges have a convective boundary condition (h=20W/mK,T=300K). Just a steady simulation. The final temperature should be about 305K. The relaxation factor is 1. Problem: Ultra slow convergence velocity, about 0.01K/iter. Can anybody tell me how to solve this problem? the velocity is unacceptable. Thanks. 
Re: Ultra slow convergence velocity in the simulat
Sorry, the heat source is 2.02e8W/m2, just a clerical error.

All times are GMT 4. The time now is 05:21. 