CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Setting Boundary Conditions (pretty pictures!)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 6, 2005, 17:23
Default Setting Boundary Conditions (pretty pictures!)
  #1
Riaan
Guest
 
Posts: n/a
Hi guys,

I am trying to simulate a forward aircraft fuselage with a intake duct mounted on the side.

Refer to this simplified picture for reference:

http://www.100megsfree.com/maverick/CFD/DAI-C%20Boundary%20Question.jpg

Is this the correct B.C.? Can I use Pressure Far Field in combination with Pressure Outlets?

Thanks Riaan
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Domain Imbalance HMR CFX 5 October 10, 2016 06:57
symmetry boundary conditions in cfx lost.identity CFX 41 May 22, 2013 08:21
inlet velocity boundary condition murali CFX 5 August 3, 2012 09:56
Reading field values and setting them as boundary conditions sega OpenFOAM Running, Solving & CFD 1 July 7, 2009 07:18
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15


All times are GMT -4. The time now is 09:41.