 |
 |
 |
|
|
|
[Sponsors] | ||||
October 10, 2005, 03:16
|
applying results as b.c on some other model
|
#1 |
|
Guest
Posts: n/a
|
can anybody help me, is this possible to apply results from one case to the other case as b.c (e.g. temp)?
|
|
|
||
|
October 10, 2005, 04:39
|
Re: applying results as b.c on some other model
|
#2 |
|
Guest
Posts: n/a
|
Use file->write profile to export profiles on boundaries and use file->read profile ro read it into your new case. The profile will then become available as a boundary condition.
RoM |
|
|
|
||
|
October 10, 2005, 07:36
|
Re: applying results as b.c on some other model
|
#3 |
|
Guest
Posts: n/a
|
thank u very much, thankalot. its fine. that means, from this we can get any value, is it?
|
|
|
|
||
|
October 10, 2005, 08:03
|
Re: applying results as b.c on some other model
|
#4 |
|
Guest
Posts: n/a
|
I have used it for temperature, velocity and turbulence (k-e). I think it will work for all the values that you can export.
RoM |
|
|
|
||
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Atomization and Breakup model | xck1986 | OpenFOAM | 4 | May 31, 2014 05:43 |
| Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 04:32 |
| Problems bout CFD model of biomass gasification, Downdraft gasifier | wanglong | FLUENT | 2 | November 26, 2009 00:27 |
| DPM model w/ Wave model - errors in documentation | HS | FLUENT | 0 | April 12, 2006 05:37 |
| How to define dynamic mesh model B.C using Profile | David | FLUENT | 3 | February 18, 2004 17:57 |
Linear Mode
