CFD Online Logo CFD Online URL
Home > Forums > FLUENT

centrifugal compressor-boundary condition?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 16, 2005, 04:35
Default centrifugal compressor-boundary condition?
gisu park
Posts: n/a
i am currently analysing a centrifugal compressor. Now the problem i am having with is how to set inlet and outlet boundary condition...cause impeller is rotating with really high RPM=100000. ItÅ› compressible flow. In fluent, only pressure inlet and outlet is available for compressible flow. (not vel_in and outflow)..Currently, i am using atmospeheric as pressure inlet, but i am stuck in setting outlet pressure. Does anayone know how to set the boundary condition & technique on how to achieve right technique of analysing compressor in this case?
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Centrifugal pump boundary condition Mohankumarg12 FLUENT 2 August 9, 2011 00:04
centrifugal compressor boundary condition nuimlabib Main CFD Forum 0 June 25, 2010 17:43
boundary condition for centrifugal fan vishal FLUENT 0 November 6, 2007 07:29
Boundary condition for centrifugal fan kamal Siemens 2 August 7, 2007 22:33
boundary condition impeller centrifugal pump mino2006 FLUENT 2 December 28, 2006 19:07

All times are GMT -4. The time now is 10:16.