Creating IGES file from dbs

October 18, 2005, 07:32

hello, Could any one pleae let me know how to creat IGES file in Gambit from dbs file. Regards, Vinod

October 18, 2005, 07:55

hi, I think you could do that by clicking on "File / Export" and then choose "File Format / IGES"

Best regards Delphine

October 18, 2005, 08:08

Thanks Delphine, I tried with File/Export, but can't find any IGES file in my working directory. In text field i can see 1 iges body(s),0 face,0 edge, 0 vertex Regards, Vinod

October 18, 2005, 08:14

Have you tried to save and exit after export? I don't understand what is the cause of it, but that's a problem I've already met several times. I hope this trick might help you.

Regards, Delphine

October 18, 2005, 19:08

as i think if you have any virtual part, it may not be exported, only real parts are exported into iges.

October 19, 2005, 07:28

When you're exporting the IGES file are you specifiying the directory or using the browse option to specify the path? If not, then you should try this.

Also, it sounds like gambit is exporting the solid to IGES format. If you only want surfaces then you'll need to delete the volume first retaining the faces.

Hope this helps

Mark

October 18, 2005, 07:32	Creating IGES file from dbs	#1
vinod kumar Guest Posts: n/a	hello, Could any one pleae let me know how to creat IGES file in Gambit from dbs file. Regards, Vinod

October 18, 2005, 07:55	Re: Creating IGES file from dbs	#2
delphine Guest Posts: n/a	hi, I think you could do that by clicking on "File / Export" and then choose "File Format / IGES" Best regards Delphine

October 18, 2005, 08:08	Re: Creating IGES file from dbs	#3
vinod kumar Guest Posts: n/a	Thanks Delphine, I tried with File/Export, but can't find any IGES file in my working directory. In text field i can see 1 iges body(s),0 face,0 edge, 0 vertex Regards, Vinod

October 18, 2005, 08:14	Re: Creating IGES file from dbs	#4
delphine Guest Posts: n/a	Have you tried to save and exit after export? I don't understand what is the cause of it, but that's a problem I've already met several times. I hope this trick might help you. Regards, Delphine

October 18, 2005, 19:08	Re: Creating IGES file from dbs	#5
zxaar Guest Posts: n/a	as i think if you have any virtual part, it may not be exported, only real parts are exported into iges.

October 19, 2005, 07:28	Re: Creating IGES file from dbs	#6
Mark Guest Posts: n/a	When you're exporting the IGES file are you specifiying the directory or using the browse option to specify the path? If not, then you should try this. Also, it sounds like gambit is exporting the solid to IGES format. If you only want surfaces then you'll need to delete the volume first retaining the faces. Hope this helps Mark

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[swak4Foam] GroovyBC the dynamic cousin of funkySetFields that lives on the suburb of the mesh	gschaider	OpenFOAM Community Contributions	300	October 29, 2014 18:00
paraview installation woes	vex	OpenFOAM Installation	15	January 30, 2011 07:11
DxFoam reader update	hjasak	OpenFOAM Post-Processing	69	April 24, 2008 01:24
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 14:00
error while compiling the USER Sub routine	CFD user	CFX	3	November 25, 2002 15:16