CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Poor Results with RSM in Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 31, 2005, 19:01
Default Poor Results with RSM in Fluent
Posts: n/a
I am trying to compute the skin friction coefficent on an isothermal plate for validation purposes. Using the k-w SST I get very accuate results. Using the RSM, not even close. The flow is at Ma = 0.5. The air is at 1000 K and the plate is at 200 K. The mesh has a y+ of 0.1.

Any suggestions?

Thank you very much for your time and help.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to open Icem mesh in Ansys Fluent? emmkell FLUENT 26 June 9, 2015 15:38
Two questions on Fluent UDF Steven Fluent UDF and Scheme Programming 4 September 20, 2013 16:30
Fluent 6.3 32bit vs Fluent 12.0 64bit ibex7 FLUENT 7 April 18, 2011 02:44
RSM model in Fluent bob FLUENT 3 May 10, 2004 10:49
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 04:27

All times are GMT -4. The time now is 20:48.