Interpolation of solution in TUI
Hello all,
I have to do many simulations with different geometries, so I am running only *journal files(gambit.jou, fluent.jou). I am wondering if there is a command in scheme language so as to interpolate my last solution and have quickier my results. I know that such a thing is feasible in GUI,but in TUI?? Thank you very much in advance. |
Hi
Hi dear sir
I'm a student of Isfahan University of Technology in IRAN,want to work with the fluent software. how could I learn to work with this software Thanks SNA |
Re: Hi
Hi,
first of all, please post your comments in the forum directly, not as a response to someone (with "Post New Message" link). For learning Fluent, have a look at http://instruct1.cit.cornell.edu/cou...uent/index.htm Some Toutorials, that may help. Ralf |
Re: Interpolation of solution in TUI
The journal command shall be this: file interpolate wrie-data file.ic yes file interpolate read-data yesfile.ic
or file interpolate wrie-data file.ic yes file interpolate read-data yes file.ic please let me know if it works, sincei never tried it myself. |
Re: Interpolation of solution in TUI
Okey i treid the jou and it works fine, but there is a little change in jou
This is the jou that i ran and it works fine file read-case-data "d:\srifd\arjun\aa_mainprojects\cfd\fluentmeshstor e\BumbedMesh01.cas" file interpolate write-data "d:\srifd\arjun\aa_mainprojects\cfd\fluentmeshstor e\bumped.ic" yes file interpolate read-data "d:\srifd\arjun\aa_mainprojects\cfd\fluentmeshstor e\bumped.ic" |
Re: Interpolation of solution in TUI
Thanks a lot!!! I wllii try it and post my solution.
Have a nice day, john |
All times are GMT -4. The time now is 00:08. |