CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Fluent periodicity problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 14, 2006, 13:47
Default Fluent periodicity problem
  #1
CFD_boy
Guest
 
Posts: n/a
Hi,I'm doing a simulation on a turbine rotor and i have a classical periodicity problem: i set the the rotational periodic type in boundary conditions; the turbine have 25 blades and so when i check the grid, messages correctly say that the angle is 14.400 degree. When i run the simulation results aren't periodic in static pressure and temperature on the inlet surface (the outlet is ok). I can't found the reason, i think that maybe gambit generate a wrong grid but when i make the check i get no error messages. Does anybody have a suggestion for me? Thanks in advantage.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent - license problem. Marcin FLUENT 3 April 13, 2018 17:33
fluent parallel problem in win7 x64 system dunga82 FLUENT 8 April 19, 2012 21:23
fluent convergence problem josip76 FLUENT 0 May 26, 2011 21:08
[ICEM] [FLUENT] 2D Geometry problem when exporting to Fluent - Unwanted walls MikeTichondrius ANSYS Meshing & Geometry 1 February 9, 2011 14:31
Fluent problem Z FLUENT 1 April 8, 2005 05:22


All times are GMT -4. The time now is 05:31.