CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Wind tunnel with constraints

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 10, 2006, 19:13
Default Wind tunnel with constraints
  #1
Neelima
Guest
 
Posts: n/a
I want to create a wind tunnel/rectangular tank with solid constraints in it. Can anyone tell me how to model and mesh it in GAMBIT. Thanks Neelima
  Reply With Quote

Old   January 14, 2006, 18:38
Default Re: Wind tunnel with constraints
  #2
vivek
Guest
 
Posts: n/a
you will need to create the air volume of your simulation model. create the geometry in gambit and mesh it.for geometry creation in gambit you have to start from defining virtices, then lines,surfaces and volumes. after creating the model, mesh it. assign your boundary conditions to all surfaces(in gambit). export the mesh file. and then import it to fluent.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
wind tunnel results vs fluent pixie Main CFD Forum 1 August 20, 2009 09:02
how to consider perforated wind tunnel wall in CFD simulation littlelz CFX 4 June 11, 2009 06:51
Virtual Wind Tunnel in FLUENT ND FLUENT 0 April 7, 2006 08:43
Wind tunnel modeling Pandu CFX 3 May 19, 2003 22:49
Wind Tunnel Website now online Mike Worthey Main CFD Forum 0 June 6, 2000 03:27


All times are GMT -4. The time now is 01:06.