Heat Transfer from Solid To Liquid!

January 19, 2006, 17:52

I must be doing something wrong here! Im not getting any heat flux across the interface between solid and liquid! Ive set it as a coupled interface, so Im not sure why theres no heat flux.

January 20, 2006, 05:43

Why do you believe there is no heat flux? Because you don't see any in the contour plots, or because the numerical value reported by Fluent for the heat flux is exactly 0.

Is is a stationary calculation or transient? Does the solid has a heat energy source or somewhere a fixed temperature?

good luck, Laika, still orbiting

January 19, 2006, 17:52	Heat Transfer from Solid To Liquid!	#1
Richard Guest Posts: n/a	I must be doing something wrong here! Im not getting any heat flux across the interface between solid and liquid! Ive set it as a coupled interface, so Im not sure why theres no heat flux.

January 20, 2006, 05:43	Re: Heat Transfer from Solid To Liquid!	#2
Laika Guest Posts: n/a	Why do you believe there is no heat flux? Because you don't see any in the contour plots, or because the numerical value reported by Fluent for the heat flux is exactly 0. Is is a stationary calculation or transient? Does the solid has a heat energy source or somewhere a fixed temperature? good luck, Laika, still orbiting

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Two-sided Wall Heat Transfer BC - No Separate Solid Mesh and No Heat Transfer Coeff	swahono	OpenFOAM Running, Solving & CFD	10	October 15, 2018 05:43
Heat Flux at wall in a conjugate heat transfer problem	Chander	CFX	2	July 9, 2011 22:22
No Heat Transfer between two solid domains	Mike ZH	CFX	7	July 26, 2008 16:50
Convective Heat Transfer - Heat Exchanger	Mark	CFX	6	November 15, 2004 15:55
free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin	Kaushik	FLUENT	1	May 8, 2000 06:47