CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

mesh size interaction with fluent solution??

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 20, 2006, 02:36
Default mesh size interaction with fluent solution??
  #1
Prince Samson
Guest
 
Posts: n/a
Hello friends....

Is the mesh size generated in gambit affects the solution generated by fluent???

Like.....for granular flow....does the mesh size need to be the size of the particles???
  Reply With Quote

Old   January 20, 2006, 06:35
Default Re: mesh size interaction with fluent solution??
  #2
Laika
Guest
 
Posts: n/a
ah, another one looking for the holy grail of mesh-independency!

We cannot answer your question, since whether the mesh density matters or not, depends on the mesh you already have. Good meshing is the key thing in CFD, and asks for a lot more experience then picking the right models in the CFD solver.

Picking the right models asks for understanding of the models itself. Creating a good mesh asks for some upfront understanding of the flow-phenomena and a lot of experience. And good modeling in total asks for a critical mind that can read through the results the combined effects of models and mesh.

If you study on the eulerian granular model implemented in Fluent, I'm sure you can answer your question whether or not your cells need to be as small as your granular particles or not.

good luck,

Laika, still orbiting
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] 2D Mesh Generation Tutorial for GMSH aeroslacker OpenFOAM Meshing & Mesh Conversion 12 January 19, 2012 04:52
engrid -> save as .stl with boundarie codes Zymon enGrid 31 August 29, 2011 14:40
Export 2D mesh from ICEM to Fluent BuilttoSpill ANSYS Meshing & Geometry 4 August 28, 2010 09:16
few quesions on ANSYS ICEMCFD and FLUENT Prakash.Paudel ANSYS 0 August 12, 2010 13:07
How to control Minximum mesh space? hung FLUENT 7 April 18, 2005 10:38


All times are GMT -4. The time now is 05:55.