CFD Online Logo CFD Online URL
Home > Forums > FLUENT

How to do this multicomponent flow in fluent?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 4, 2006, 11:24
Default How to do this multicomponent flow in fluent?
Posts: n/a
I have in my problem four gases. CO, CO2, H2, CH4.The mass fraction of gases is CO=0.70,CO2=0.07,H2=0.20,CH4=0.03. How can I apply multicomp flow in fluent?I have applied theses different gas properties in material I have fixed composition. Should I apply mixture properties manually in material which I have already calculated.In multicomponent flow can we directly apply mixture properties instead applying component properties?

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
swirling flow in simpleFoam compared with FLUENT belinda OpenFOAM Running, Solving & CFD 0 November 2, 2009 04:57
fluent flow problem Tony FLUENT 3 December 4, 2008 10:29
mass flow rates in fluent R.Sripriya FLUENT 1 November 17, 2008 00:03
Fluent Cp more than 1 for incompressible flow rif Main CFD Forum 2 September 29, 2008 05:25
Inviscid Drag at subsonic, subcritical Mach # Axel Rohde Main CFD Forum 1 November 19, 2001 13:19

All times are GMT -4. The time now is 11:50.