CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

cyclone geometry help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 15, 2006, 20:23
Default cyclone geometry help
  #1
ANJUM NAVEED
Guest
 
Posts: n/a
hi i am very new to CFD and working with fluent on cyclone. i made cycone geometry in gambit and now having problem in messhing it.i made geometry with top to bottom approach that is by volumes and i did subtraction boolean operation to creat vortex finder. now maybe my approach is wrong and should i apply bottom to top appraoch because i can not mesh it i tried different combination for messhing. second i want to know that if i mesh all the faces then will it work or i have to mesh volume for applying model. any suggestion please and if anybody can provide me with some tutorial on cyclon or any example i will apreciate. my email address is anjumnaveed76@yahoo.com thanks Anjum
  Reply With Quote

Old   February 16, 2006, 17:32
Default Re: cyclone geometry help
  #2
freeman
Guest
 
Posts: n/a
hey boy you wonna do some trial and error then check your mesh quality before exporting it.

start meshing the small volumes and proceed to the larger volumes. the danger here is that at times gambit ignore your parameters and set its own based on the earlier mesh size. if cooper doesn't try tet. Read the gambit tutorials and manual too.

all the best!!
  Reply With Quote

Old   February 17, 2006, 04:27
Default Re: cyclone geometry help
  #3
ANJUM NAVEED
Guest
 
Posts: n/a
hi by saying the mesh small volume and then go to bigger one does it mean that i can devide a big volume in smaller ones or i have to creat a geometry with smaller volumes as i told i did different boolean operations with different volumes and at the end i have only one big volume. can u suggest any good approach.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cyclone Geometry in Gambit Rajesh Kumar Main CFD Forum 4 July 7, 2012 07:07
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
[Gmsh] Problem meshing an imported geometry Alicia OpenFOAM Meshing & Mesh Conversion 0 March 30, 2010 05:53
Simulation of Flow through Complex 3D Geometry EmersonKB CFX 5 July 2, 2009 09:17
vitual _ real deneb FLUENT 3 January 22, 2007 05:31


All times are GMT -4. The time now is 11:56.