CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Fluent doesn't load the mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 17, 2006, 05:44
Default Fluent doesn't load the mesh
Posts: n/a
I have a mesh with ca. 4 million cells. When i try to read it in Fluent i get an error like:

'out of range' [face 5456] (0<2576549)

Is there something to do with the capacity of the computer?

  Reply With Quote

Old   February 18, 2006, 02:29
Default Re: Fluent doesn't load the mesh
Seyed Farid Hosseinizadeh
Posts: n/a
Hey Man , I don't know that my advice works or not. But I think you must go on Gambit: Gambit-Edit-default-mesh-trimesh- in this option you see the "MAX-Face" or maximum number of faces allowed. I think the default number is 100000. You meus change it to (-1) by clicking on it and enter the number(-1)in the bottom in "Modify" section. May be you must enter a bigger value than 10000 and it works. I hope that works for you. Regards, Farid,
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent converting 'wall' to 'interior' BC for hybrid mesh DarrenC FLUENT 7 November 15, 2016 11:01
[ICEM] Using Surface Mesh from ANSA for Fluent Sim tommymoose ANSYS Meshing & Geometry 15 March 3, 2016 18:29
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 06:42
Can anybody tell me what does fluent do using MESH MOTION? enry FLUENT 0 October 6, 2010 12:54
Import ICEM Mesh to Fluent Fluent Beginner FLUENT 5 June 23, 2004 00:27

All times are GMT -4. The time now is 17:39.