Counting the number of cells in GAMBIT

February 24, 2006, 15:26

Hi Folks

I need to know how I would count the number of meshed cells (mesh number) in gambit...any ideas?

February 25, 2006, 11:37

check the quality

praveenkumar · March 16, 2010, 23:35

Quote:

Originally Posted by Ravi Doddas
;129362

Hi Folks

I need to know how I would count the number of meshed cells (mesh number) in gambit...any ideas?

wen u export .msh file to fluent it will give all the information abt the geometry and mesh.

-mAx- · March 17, 2010, 01:53

go to examine mesh, it shows you all the cells, and also how many active cells there are

ssixr · May 1, 2013, 22:51

hi ravi
type "list totals" in gambit command window(without quotes) to get brief details of your mesh.

sumeetkotak · October 19, 2024, 03:15

This is very much helpful. thanks

Quote:

Originally Posted by ssixr

hi ravi
type "list totals" in gambit command window(without quotes) to get brief details of your mesh.

February 24, 2006, 15:26	Counting the number of cells in GAMBIT	#1
Ravi Doddas Guest Posts: n/a	Hi Folks I need to know how I would count the number of meshed cells (mesh number) in gambit...any ideas?

February 25, 2006, 11:37	Re: Counting the number of cells in GAMBIT	#2
A Guest Posts: n/a	check the quality

March 17, 2010, 01:53		#4
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 42	go to examine mesh, it shows you all the cells, and also how many active cells there are __________________ In memory of my friend Hervé: CFD engineer & freerider

May 1, 2013, 22:51	command	#5
ssixr Member sudhir Join Date: Mar 2009 Location: india Posts: 65 Rep Power: 18	hi ravi type "list totals" in gambit command window(without quotes) to get brief details of your mesh. nvarma and elham usefi like this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to let the mesh motion solver just solve a small region near a moving boundary?	zhajingjing	OpenFOAM Running, Solving & CFD	9	April 28, 2016 04:15
[Netgen] Import netgen mesh to OpenFOAM	hsieh	OpenFOAM Meshing & Mesh Conversion	32	September 13, 2011 05:50
[mesh manipulation] To increase number of cells and faces	pkr	OpenFOAM Meshing & Mesh Conversion	0	November 28, 2010 13:26
DecomposePar unequal number of shared faces	maka	OpenFOAM Pre-Processing	6	August 12, 2010 09:01
air bubble is disappear increasing time using vof	xujjun	CFX	9	June 9, 2009 07:59