CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

How To Input Mass Sources to Simulate Adsorption?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 1, 2006, 07:25
Default How To Input Mass Sources to Simulate Adsorption?
  #1
Carlos V.
Guest
 
Posts: n/a
Hi Everybody

I'm working in a cilinder, wich i've defined as a porous zone. In this work, i've an 2D axisymetric problem, with a mass flow inlet, an outflow,and the wall of the cylinder described as "wall". I've defined the 2D face as a porous zone. Despite having a very simple geometry, I've a problem - I've a mass flow inlet of hydrogen, and I want to program a source equation based on the local values of the porous matrix in my UDF, to simulate the adsorption of this specie, but i'm not reaching the way to do that. Can anybody help me?

Thanks Carlos V.
  Reply With Quote

Old   September 3, 2010, 07:38
Default Sos
  #2
New Member
 
karl fisher
Join Date: Sep 2010
Posts: 7
Rep Power: 15
karl fisher is on a distinguished road
Hello,
What about your adssorption problem ? please help me if youn resolved it.
Thanks a lot
karl fisher is offline   Reply With Quote

Old   September 14, 2010, 08:52
Default
  #3
Member
 
Byron Smith R J
Join Date: Mar 2009
Location: India
Posts: 46
Rep Power: 17
byronsmith is on a distinguished road
hai
if its surface adsorption, use the rate of adsorption as species source sink
byronsmith is offline   Reply With Quote

Old   September 15, 2010, 16:42
Thumbs up More information please
  #4
New Member
 
karl fisher
Join Date: Sep 2010
Posts: 7
Rep Power: 15
karl fisher is on a distinguished road
Hi,
tell me more and thank you so much. Like links, tutoriels....etc.
regards
karl fisher is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Problem setting with chtmultiregionFoam Antonin OpenFOAM 10 April 24, 2012 10:50
particle, parcel and mass flow rate balance flybird FLUENT 0 May 24, 2007 11:44
Input for Mass, Frequency and Damping Sham FLUENT 0 March 29, 2007 23:37
pressure input, mass flow output Venugopal Bachu Main CFD Forum 0 January 11, 2007 11:01


All times are GMT -4. The time now is 10:47.