CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Question about DEFINE_EXECUTE_AT_END macro

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 8, 2006, 09:20
Default Question about DEFINE_EXECUTE_AT_END macro
  #1
Vishal
Guest
 
Posts: n/a
Hi all, Can someone please tell me whether the macro DEFINE_EXECUTE_AT_END is called after each iteration/timestep or it is called only once i.e. at the end of iterations/timestep?

Thanks & Regards, Vishal
  Reply With Quote

Old   March 8, 2006, 12:52
Default Re: Question about DEFINE_EXECUTE_AT_END macro
  #2
Q
Guest
 
Posts: n/a
read manual
  Reply With Quote

Old   March 8, 2006, 23:55
Default Re: Question about DEFINE_EXECUTE_AT_END macro
  #3
Vishal
Guest
 
Posts: n/a
Thank you! I posted this message after reading manual only, but from it I cudn't make out whether the above macro is called only once or after end of each iteration. Thanks & Regards, Vishal
  Reply With Quote

Old   March 9, 2006, 00:28
Default Re: Question about DEFINE_EXECUTE_AT_END macro
  #4
yoshida
Guest
 
Posts: n/a
If you calculate steady state problem, the macro is called only once after provided number of iterations or after the solution is converged. However, in the case of unsteady state problem, the macro is called at the end of each time step.

Actually, I want to make a UDF which send me a e-mail after calculation finished. But if I use this EXECUTE_AT_END macro in unsteady state problem, it send me,,,,

  Reply With Quote

Old   March 10, 2006, 07:24
Default Re: Question about DEFINE_EXECUTE_AT_END macro
  #5
Vishal
Guest
 
Posts: n/a
Hi, I tried to specify above macro and gave some print statements in it's block and observed that these statements got printed after each iteration for steady state run. Thanks & Regards, Vishal
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
question about uds tanven FLUENT 2 July 5, 2015 12:22
Unanswered question niklas OpenFOAM 2 July 31, 2013 17:03
internal field question - PitzDaily Case atareen64 OpenFOAM Running, Solving & CFD 2 January 26, 2011 16:26
Question about Table applicaiton. universez OpenFOAM Running, Solving & CFD 0 January 12, 2010 21:31
Poisson Solver question Suresh Main CFD Forum 3 August 12, 2005 05:37


All times are GMT -4. The time now is 04:02.