|
[Sponsors] |
March 9, 2006, 10:57 |
Problem with POROUS-MEDIA.
|
#1 |
Guest
Posts: n/a
|
Hi, my name is Jordi. Congratulation for the web, it's very useful. Well, I'm working in a project. I'm interested about how works the porous media in FLUENT, because I had been trying to set the Fluent for work with the porous media and I didn't what I want. The CASE is a simulation of one wind tunnel with a QUAD inside of it. And I want this QUAD must be my porous media. But I cannot get my objective. If any of you don't understand what I'm saying, please let me know and I will explain the case more accurately. THANKS ALL OF YOU! I hope of any of you could reply me. THANKS.
SEE U GUYS! |
|
March 9, 2006, 12:58 |
Re: Problem with POROUS-MEDIA.
|
#2 |
Guest
Posts: n/a
|
It is not really clear, where are you from?
Frank |
|
March 9, 2006, 18:37 |
Re: Problem with POROUS-MEDIA.
|
#3 |
Guest
Posts: n/a
|
Jordi is a Catalan name, so he must be from Catalunya. You have to define a zone within your domain at the Gambit level, the rest is pan comido
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pressure drag problem in porous media with interFoam | skp | OpenFOAM Running, Solving & CFD | 8 | May 27, 2015 09:10 |
Porous media solving problem | mulfal | OpenFOAM Running, Solving & CFD | 2 | June 23, 2010 06:31 |
species mass source in porous media ? | PK | FLUENT | 0 | February 16, 2007 12:12 |
Testing the integrity of POROUS media and por jump | Azman | FLUENT | 0 | July 31, 2006 12:11 |
porous media/jump mass flow problem | Marijo | FLUENT | 0 | February 17, 2006 12:49 |