CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Plzzzzzzzzzz... help in ploting residual graph....

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 28, 2006, 00:24
Default Plzzzzzzzzzz... help in ploting residual graph....
  #1
Prince Samson
Guest
 
Posts: n/a
Hello friends,

I'm studying a slurry flow inside a 2d rectangular tank......now the problem is when i start iterating the conmtinuity line in the residual graph falls above the divergence criterai i.e 10e-3....in the initial stage of iteration it is below 10e-3 but after sometime it goes to 10e-2.....i want it to be well below 10e-3.....plz help.......

prinz
  Reply With Quote

Old   March 28, 2006, 05:04
Default Re: Plzzzzzzzzzz... help in ploting residual graph
  #2
Mac
Guest
 
Posts: n/a
Hi, Try reducing the under-relaxation factor for pressure and see the difference. Hope it works.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Extrusion with OpenFoam problem No. Iterations 0 Lord Kelvin OpenFOAM Running, Solving & CFD 8 March 28, 2016 12:08
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 16:33
Orifice Plate with a fully developed flow - Problems with convergence jonmec OpenFOAM Running, Solving & CFD 3 July 28, 2011 06:24
Differences between serial and parallel runs carsten OpenFOAM Bugs 11 September 12, 2008 12:16
Unknown error sivakumar OpenFOAM Pre-Processing 9 September 9, 2008 13:53


All times are GMT -4. The time now is 08:02.