|
[Sponsors] |
April 10, 2006, 11:28 |
varied pressure boundary condition...help???
|
#1 |
Guest
Posts: n/a
|
I am working on an airbox simulation where air enters with certain velocity and exits through an outlet. There is a certain static pressure being exerted at the outlet. I know the inlet velocity and the static pressure at the outlet at the initial conditions. Later the variation of the pressure accorss the outlet is dependent on the velocity component just before the outlet given by an expression.
My question is can i set the pressure at the outlet to vary with respect to the velocity of the air just before the outlet? If yes How can i do it? Any help is greatly appreciated. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pressure boundary condition | C-H Kuo | Main CFD Forum | 18 | September 16, 2016 04:19 |
Static pressure boundary condition at outlet | jennz | CFX | 4 | February 11, 2014 04:29 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 04:32 |
Pressure Boundary condition | abishek | FLUENT | 1 | July 28, 2008 09:14 |
Pressure Boundary Condition | chiseung | FLUENT | 1 | June 19, 2001 22:05 |