Gaseous nitrogen cylinder deplition Problem -- CFD Online Discussion Forums

May 12, 2006, 03:36	Gaseous nitrogen cylinder deplition Problem	#1
S.Balasubramanian Guest Posts: n/a	hai, Now I am analyzing Cylinder depletion problem.The gaseous nitrogen is tapped from 300 bar cylinder to the utility point of 25 bar thru' control valve .I have done the steady state analysis. Now i am in need of help for the transient analysis of the above problem by (Valve Closing)converting the pressure outlet to wall BC condition over a period of time.I didn"t have the transient flow behaviour of gas nitrogen under valve closing. If any have UDF program of converting the pressure outlet to wall BC conditon over a flow time in transient analysis.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX convergence problem simulating ogive-cylinders at varied angle of attack	jdacosta	CFX	6	February 25, 2015 21:42
[snappyHexMesh] snappyHexMesh - 2D Cylinder Problems	Logan Page	OpenFOAM Meshing & Mesh Conversion	4	May 27, 2013 12:07
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 05:59
[blockMesh] Meshing inside a cylinder so that the edges contain more cells than the center	Bertrand	OpenFOAM Meshing & Mesh Conversion	1	April 13, 2010 04:46
Flow over a cylinder	Anna	Main CFD Forum	9	March 24, 2006 14:32

All times are GMT -4. The time now is 15:15.