CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

exporting surface/line of a case file to other cas

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 24, 2006, 00:42
Default exporting surface/line of a case file to other cas
  #1
Mazyar
Guest
 
Posts: n/a
Hi,

Thanks for your interest in reading my question.

I have already defined many LINES in my domain in order to extract the data on these lines. I have similar case files that I need to define the same LINES. It is very time consuming to define those lines in each case file. I was wondering if there is any way that I can copy or export the lines from the proginal file to the others.

Thanks, Maz
  Reply With Quote

Old   May 24, 2006, 01:40
Default Re: exporting surface/line of a case file to other
  #2
Peter
Guest
 
Posts: n/a
If you're prepared to do this just one more time, there is a way out. Just before creating the lines/surfaces, start the journal from the file menu and when you're done, stop the journal. Now, you can use this journal file to create lines/surfaces in other cases with least effort.
  Reply With Quote

Old   May 24, 2006, 02:08
Default Re: exporting surface/line of a case file to other
  #3
Mazyar
Guest
 
Posts: n/a
Wondeful, it worked as you said; it will save me lots of time. Thanks lot Peter.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
wmake compiling new solver mksca OpenFOAM Programming & Development 14 June 22, 2018 07:29
Convection discretization schemes for LES sek OpenFOAM Running, Solving & CFD 38 July 31, 2017 15:30
pisoFoam compiling error with OF 1.7.1 on MAC OSX Greg Givogue OpenFOAM Programming & Development 3 March 4, 2011 18:18
[blockMesh] Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Meshing & Mesh Conversion 10 April 2, 2007 15:00
Free surface boudary conditions with SOLA-VOF Fan Main CFD Forum 10 September 9, 2006 13:24


All times are GMT -4. The time now is 05:49.