CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Moving Boundaries

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 25, 2006, 21:19
Default Moving Boundaries
  #1
Bharat
Guest
 
Posts: n/a
Hello Fluent users: I have been trying to solve a case study in fluent involving moving walls but was not successful. Every time when i try to repeat the examples in the manual, i get the following error message after a few iterations.

"Negative cell volume detected"

Any thoughts to overcome this would be very helpful.
  Reply With Quote

Old   May 26, 2006, 05:30
Default Re: Moving Boundaries
  #2
skd
Guest
 
Posts: n/a
Hi, Try to reduce your time step!

Skd
  Reply With Quote

Old   May 27, 2006, 17:05
Default boundary conditions
  #3
sadoun
Guest
 
Posts: n/a
What are the sutible B.C for intake air flow through engines
  Reply With Quote

Old   May 27, 2006, 17:07
Default Re: boundary conditions
  #4
sadoun
Guest
 
Posts: n/a
fuel injection directly into chamber at 40 degree BTDC. which moel is for this problem
  Reply With Quote

Old   May 28, 2006, 16:35
Default Re: boundary conditions
  #5
sadoun
Guest
 
Posts: n/a
What are the sutible B.C for intake air flow through engines .(open inlet valve)
  Reply With Quote

Old   June 8, 2006, 02:34
Default Re: Moving Boundaries
  #6
Fabrice
Guest
 
Posts: n/a
Hi guy,

I've got exactly the same problem than you. In fact you need to input a dynamic mesh. I wonder if we don't need any grid interfaces in more, I will let you know if I succeed.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
deformable or moving boundaries indd Main CFD Forum 2 June 19, 2004 04:57
Moving boundaries Pawel Main CFD Forum 7 October 14, 2002 02:12
Moving Boundaries Olga Siemens 0 September 5, 2002 11:20
Turbulent incompressible flow & moving boundaries Cristian Orozco Main CFD Forum 1 July 5, 2002 13:45
Calculations with moving boundaries Rene Francesco Main CFD Forum 6 February 7, 2002 08:38


All times are GMT -4. The time now is 17:57.